Evaporative Condensers

Evaporative Condensers

The vapor to be condensed is circulated through a condensing coil, which is continually wetted on the outside by a recirculating water system. Air is pulled over the coil, causing a small portion of the recirculating water to evaporate. The evaporation removes heat from the vapor in the coil, causing it to condense.

The evaporative condenser has a cabinet with a water-sprayed condenser, and it usually has one or more fans. The excess heat is removed by evaporating water. In an evaporative condenser the primary coolant of the cooling system is cooled, which is the opposite of a cooling tower. Evaporator condensers are more expensive than dry coolers and are primarily used in large cooling systems or systems where the outdoor temperature is high. In many locations around the world, regulations limit the physical size of a cooling system and this in turn limits the use of evaporative condensers.

Spraying a condenser with water exploits the fact that the dew point temperature is lower than the air temperature and that a wet surface transfers heat more efficiently.

 

1 Hot primary coolant

2 Cold primary coolant

3 Cold water

4 Water sprinklers

5 Centrifugal fan

Key benefits of Evaporative Condensers

• Low system operating costs: lower condensing temperatures for a more compact compressor using less power
• Low refrigerant charge, costs and environmental impact minimised
  
• Space-saving: up to 50% area savings compared to comparable air-cooled installations
  
  
  
  
  
  
  Other Topics
  IC engine,  Method of Ignition,  mechanical Engineering, English books,Photoshop tutorials,Harry potter,Best 100 english books,IC engine,Metal Casting,Mechnical Previous Years Gate Question Papers ,Mechanical-old-question-paper,Milling Quiz,Forging Quiz,Cold Extrusion,Hot Extrusion,CLutch,Wet Clutch,Introduction to Flywheel,Flywheel: FACTOR, Governors ,Thermal Power Plant,Pulverizer,Boiler,Fire Tube Boiler,Water Tube Boiler,Packaged Boiler,Superheater,Condenser,Types of Condenser,Air-cooled condenser types,Water-Cooled Condensers
  
  

Water-Cooled Condensers

Three main types of water-cooled condensers are pipe in a Pipe", " shell and Coil and plate. Each type performs the same task, approximately in the same conditions using different designs for ships, which contain water and refrigerant in the condenser. Consider every type, from the smallest to the largest capacity.



Pipe-in-pipe", sometimes called the double pipe or coaxial capacitor. Its name reflects its design. One tube is placed in a big pipe, and the ends of large tubes are sealed. Water circulates through one of the tubes, while the refrigerant passes through the other. In this figure, the refrigerant passes through the space between the inner and outer tube. This is the normal arrangement.





These capacitors are flexible in their location and because they are long, as a rule, they are in different forms to fit the space limitations of the application. Product shown here, a boxed product, designed for installation indoors. The compact nature of pipe-in-Pipe " capacitor makes it ideal for this product.

Tube-in-tube condensers most often are used for air conditioning products up to 5 tons of cooling capacity. They are also used, however, the commercial products through approximately 20 tons, as this vertical air conditioning (VAC). This design is ideal for adding air conditioning to old buildings being renovated...

Types of Condenser

1.Air Cooled
2.Water Cooled
3.Evaporative

Other Topics

IC engine,  Method of Ignition,  mechanical Engineering, English books,Photoshop tutorials,Harry potter,Best 100 english books,IC engine,Metal Casting,Mechnical Previous Years Gate Question Papers ,Mechanical-old-question-paper,Milling Quiz,Forging Quiz,Cold Extrusion,Hot Extrusion,CLutch,Wet Clutch,Introduction to Flywheel,Flywheel: FACTOR, Governors ,Thermal Power Plant,Pulverizer,Boiler,Fire Tube Boiler,Water Tube Boiler,Packaged Boiler,Superheater,Condenser